Artificial Intelligence Nanodegree

Convolutional Neural Networks

Project: Write an Algorithm for a Dog Identification App


In this notebook, some template code has already been provided for you, and you will need to implement additional functionality to successfully complete this project. You will not need to modify the included code beyond what is requested. Sections that begin with '(IMPLEMENTATION)' in the header indicate that the following block of code will require additional functionality which you must provide. Instructions will be provided for each section, and the specifics of the implementation are marked in the code block with a 'TODO' statement. Please be sure to read the instructions carefully!

Note: Once you have completed all of the code implementations, you need to finalize your work by exporting the iPython Notebook as an HTML document. Before exporting the notebook to html, all of the code cells need to have been run so that reviewers can see the final implementation and output. You can then export the notebook by using the menu above and navigating to \n", "File -> Download as -> HTML (.html). Include the finished document along with this notebook as your submission.

In addition to implementing code, there will be questions that you must answer which relate to the project and your implementation. Each section where you will answer a question is preceded by a 'Question X' header. Carefully read each question and provide thorough answers in the following text boxes that begin with 'Answer:'. Your project submission will be evaluated based on your answers to each of the questions and the implementation you provide.

Note: Code and Markdown cells can be executed using the Shift + Enter keyboard shortcut. Markdown cells can be edited by double-clicking the cell to enter edit mode.

The rubric contains optional "Stand Out Suggestions" for enhancing the project beyond the minimum requirements. If you decide to pursue the "Stand Out Suggestions", you should include the code in this IPython notebook.


Why We're Here

In this notebook, you will make the first steps towards developing an algorithm that could be used as part of a mobile or web app. At the end of this project, your code will accept any user-supplied image as input. If a dog is detected in the image, it will provide an estimate of the dog's breed. If a human is detected, it will provide an estimate of the dog breed that is most resembling. The image below displays potential sample output of your finished project (... but we expect that each student's algorithm will behave differently!).

Sample Dog Output

In this real-world setting, you will need to piece together a series of models to perform different tasks; for instance, the algorithm that detects humans in an image will be different from the CNN that infers dog breed. There are many points of possible failure, and no perfect algorithm exists. Your imperfect solution will nonetheless create a fun user experience!

The Road Ahead

We break the notebook into separate steps. Feel free to use the links below to navigate the notebook.

  • Step 0: Import Datasets
  • Step 1: Detect Humans
  • Step 2: Detect Dogs
  • Step 3: Create a CNN to Classify Dog Breeds (from Scratch)
  • Step 4: Use a CNN to Classify Dog Breeds (using Transfer Learning)
  • Step 5: Create a CNN to Classify Dog Breeds (using Transfer Learning)
  • Step 6: Write your Algorithm
  • Step 7: Test Your Algorithm

Step 0: Import Datasets

Import Dog Dataset

In the code cell below, we import a dataset of dog images. We populate a few variables through the use of the load_files function from the scikit-learn library:

  • train_files, valid_files, test_files - numpy arrays containing file paths to images
  • train_targets, valid_targets, test_targets - numpy arrays containing onehot-encoded classification labels
  • dog_names - list of string-valued dog breed names for translating labels
In [4]:
from sklearn.datasets import load_files       
from keras.utils import np_utils
import numpy as np
from glob import glob

# define function to load train, test, and validation datasets
def load_dataset(path):
    data = load_files(path)
    dog_files = np.array(data['filenames'])
    dog_targets = np_utils.to_categorical(np.array(data['target']), 133)
    return dog_files, dog_targets

# load train, test, and validation datasets
train_files, train_targets = load_dataset('dogImages/train')
valid_files, valid_targets = load_dataset('dogImages/valid')
test_files, test_targets = load_dataset('dogImages/test')

# load list of dog names
dog_names = [item[20:-1] for item in sorted(glob("dogImages/train/*/"))]

# print statistics about the dataset
print('There are %d total dog categories.' % len(dog_names))
print('There are %s total dog images.\n' % len(np.hstack([train_files, valid_files, test_files])))
print('There are %d training dog images.' % len(train_files))
print('There are %d validation dog images.' % len(valid_files))
print('There are %d test dog images.'% len(test_files))
There are 133 total dog categories.
There are 8351 total dog images.

There are 6680 training dog images.
There are 835 validation dog images.
There are 836 test dog images.

Import Human Dataset

In the code cell below, we import a dataset of human images, where the file paths are stored in the numpy array human_files.

In [14]:
import random
random.seed(8675309)

# load filenames in shuffled human dataset
human_files = np.array(glob("lfw/*/*"))
random.shuffle(human_files)

# print statistics about the dataset
print('There are %d total human images.' % len(human_files))
There are 13233 total human images.

Step 1: Detect Humans

We use OpenCV's implementation of Haar feature-based cascade classifiers to detect human faces in images. OpenCV provides many pre-trained face detectors, stored as XML files on github. We have downloaded one of these detectors and stored it in the haarcascades directory.

In the next code cell, we demonstrate how to use this detector to find human faces in a sample image.

In [15]:
import cv2                
import matplotlib.pyplot as plt                        
%matplotlib inline                               

# extract pre-trained face detector
face_cascade = cv2.CascadeClassifier('haarcascades/haarcascade_frontalface_alt.xml')

# load color (BGR) image
img = cv2.imread(human_files[3])
# convert BGR image to grayscale
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)

# find faces in image
faces = face_cascade.detectMultiScale(gray)

# print number of faces detected in the image
print('Number of faces detected:', len(faces))

# get bounding box for each detected face
for (x,y,w,h) in faces:
    # add bounding box to color image
    cv2.rectangle(img,(x,y),(x+w,y+h),(255,0,0),2)
    
# convert BGR image to RGB for plotting
cv_rgb = cv2.cvtColor(img, cv2.COLOR_BGR2RGB)

# display the image, along with bounding box
plt.imshow(cv_rgb)
plt.show()
Number of faces detected: 1

Before using any of the face detectors, it is standard procedure to convert the images to grayscale. The detectMultiScale function executes the classifier stored in face_cascade and takes the grayscale image as a parameter.

In the above code, faces is a numpy array of detected faces, where each row corresponds to a detected face. Each detected face is a 1D array with four entries that specifies the bounding box of the detected face. The first two entries in the array (extracted in the above code as x and y) specify the horizontal and vertical positions of the top left corner of the bounding box. The last two entries in the array (extracted here as w and h) specify the width and height of the box.

Write a Human Face Detector

We can use this procedure to write a function that returns True if a human face is detected in an image and False otherwise. This function, aptly named face_detector, takes a string-valued file path to an image as input and appears in the code block below.

In [17]:
# returns "True" if face is detected in image stored at img_path
def face_detector(img_path):
    img = cv2.imread(img_path)
    gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
    faces = face_cascade.detectMultiScale(gray)
    return len(faces) > 0

(IMPLEMENTATION) Assess the Human Face Detector

Question 1: Use the code cell below to test the performance of the face_detector function.

  • What percentage of the first 100 images in human_files have a detected human face?
  • What percentage of the first 100 images in dog_files have a detected human face?

Ideally, we would like 100% of human images with a detected face and 0% of dog images with a detected face. You will see that our algorithm falls short of this goal, but still gives acceptable performance. We extract the file paths for the first 100 images from each of the datasets and store them in the numpy arrays human_files_short and dog_files_short.

Answer:

In [18]:
human_files_short = human_files[:100]
dog_files_short = train_files[:100]
# Do NOT modify the code above this line.

def percent_human_faces(img_file_names, detector):
    return np.mean(list(map(detector, img_file_names)))

humans_accuracy = percent_human_faces(human_files_short, face_detector)
dogs_accuracy = percent_human_faces(dog_files_short, face_detector)
print(f'Faces found in humans {humans_accuracy:.1%}')
print(f'Faces found in dogs {dogs_accuracy:.1%}')
Faces found in humans 100.0%
Faces found in dogs 11.0%

See dogs mistaken for humans

In [6]:
import itertools
eye_cascade = cv2.CascadeClassifier('haarcascades/haarcascade_eye.xml')

fig = plt.figure()
fig.set_size_inches(15, 10)
counter = itertools.count(1)

for file_name in dog_files_short:
    img = cv2.imread(file_name)
    gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)

    # find faces in image
    faces = face_cascade.detectMultiScale(gray)
    if not len(faces):
        continue

    eye_counts = []
    for (x, y, w, h) in faces:
        cv2.rectangle(img, (x, y), (x + w, y + h), (255, 0, 0), 2)
        roi_gray = gray[y:y+h, x:x+w]
        roi_color = img[y:y+h, x:x+w]
        eyes = eye_cascade.detectMultiScale(roi_gray)
        for ex, ey, ew, eh in eyes:
            cv2.rectangle(roi_color, (ex, ey), (ex + ew, ey + eh), (0, 255, 0), 2)
        eye_counts.append(len(eyes))
        
    cv_rgb = cv2.cvtColor(img, cv2.COLOR_BGR2RGB)
    
    sub = fig.add_subplot(3, 4, next(counter))
    sub.set_title(', '.join(str(count) for count in eye_counts))
    sub.imshow(cv_rgb)
plt.show()

Question 2: This algorithmic choice necessitates that we communicate to the user that we accept human images only when they provide a clear view of a face (otherwise, we risk having unneccessarily frustrated users!). In your opinion, is this a reasonable expectation to pose on the user? If not, can you think of a way to detect humans in images that does not necessitate an image with a clearly presented face?

Answer:

We suggest the face detector from OpenCV as a potential way to detect human images in your algorithm, but you are free to explore other approaches, especially approaches that make use of deep learning :). Please use the code cell below to design and test your own face detection algorithm. If you decide to pursue this optional task, report performance on each of the datasets.

A requirement to pose with a clearly visible face is a reasonable one.

Face is the most information-loaded feature of the human body. Other body parts (torso, ...) are usually obstructed by clothes that change from picture to picture and thus carry little useful information. Face seen from a profile angle contains only half of available information (half of facial features) and the rest (the side or back of the head) is less useful for distinguishing between people (haircut of a person can also change, sometimes drastically).

First attempt

The above algorithm detects faces in humans with very good accruracy, but it gets too many false positives on dogs. Below I attempt to detect (instead of just faces) faces with 2 eyes.

In [7]:
## (Optional) TODO: Report the performance of another  
## face detection algorithm on the LFW dataset
### Feel free to use as many code cells as needed.
eye_cascade = cv2.CascadeClassifier('haarcascades/haarcascade_eye.xml')

def has_two_eyes(gray, face):
    x, y, w, h = face
    face_area_gray = gray[y:y + h, x:x + w]
    eyes = eye_cascade.detectMultiScale(face_area_gray)
    return len(eyes) == 2

def face_detector_2(img_path):
    img = cv2.imread(img_path)
    gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
    faces = face_cascade.detectMultiScale(gray)
    faces_with_two_eyes = (True for face in faces if has_two_eyes(gray, face))
    return any(faces_with_two_eyes)

humans_accuracy = percent_human_faces(human_files_short, face_detector_2)
dogs_accuracy = percent_human_faces(dog_files_short, face_detector_2)
print(f'Faces found in humans {humans_accuracy:.1%}')
print(f'Faces found in dogs {dogs_accuracy:.1%}')
Faces found in humans 57.0%
Faces found in dogs 1.0%

Turns out that false positives in dogs are reduced, but at the cost of almost 50% accuracy on the humans dataset. This is a failed attempt.

Second attempt

Another attempt at a better face detector this time using a different detection configuration.

In [17]:
profile_cascade = cv2.CascadeClassifier('haarcascades/haarcascade_profileface.xml')

def face_detector_3(img_path):
    img = cv2.imread(img_path)
    gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
    faces = profile_cascade.detectMultiScale(gray)
    return len(faces) > 0

humans_accuracy = percent_human_faces(human_files_short, face_detector_3)
dogs_accuracy = percent_human_faces(dog_files_short, face_detector_3)
print(f'Faces found in humans {humans_accuracy:.1%}')
print(f'Faces found in dogs {dogs_accuracy:.1%}')
    
Faces found in humans 42.0%
Faces found in dogs 2.0%

This attempt gained even worse performance than the previous one. Another failed attempt. I'm staying with the original detection algorithm.

Third attempt

Using the orignal cascade configuration but with parameters tweaked.

In [19]:
profile_cascade = cv2.CascadeClassifier('haarcascades/haarcascade_frontalface_alt.xml')

def face_detector_4(img_path):
    img = cv2.imread(img_path)
    gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
    faces = profile_cascade.detectMultiScale(gray, scaleFactor=1.2, minNeighbors=5)
    return len(faces) > 0

humans_accuracy = percent_human_faces(human_files_short, face_detector_4)
dogs_accuracy = percent_human_faces(dog_files_short, face_detector_4)
print(f'Faces found in humans {humans_accuracy:.1%}')
print(f'Faces found in dogs {dogs_accuracy:.1%}')
Faces found in humans 95.0%
Faces found in dogs 2.0%

This attempt did yield better performance on dogs (smaller number of false positives) at the cost of getting some false negatives on humans.

Conclusion

Haar cascades seem to be a good tool for detecting faces in pictures. The algorithm can be tweaked through parameters to obtain accuracy that is closer to the desired one. 95% true positives rate and 2% false positives is a pretty good result.

Other approaches to this problem could include using a pre-trained CNN for detecting humans, much like detecting dogs in step 5 (using ResNet without top layers and adding own classifier on top of it).

Another approach could be using ImageNet pre-trained CNN like in step 2 below. I was unable though to find mapping of which ImageNet classes correspond to humans and thus could not try this approach.


Step 2: Detect Dogs

In this section, we use a pre-trained ResNet-50 model to detect dogs in images. Our first line of code downloads the ResNet-50 model, along with weights that have been trained on ImageNet, a very large, very popular dataset used for image classification and other vision tasks. ImageNet contains over 10 million URLs, each linking to an image containing an object from one of 1000 categories. Given an image, this pre-trained ResNet-50 model returns a prediction (derived from the available categories in ImageNet) for the object that is contained in the image.

In [20]:
from keras.applications.resnet50 import ResNet50

# define ResNet50 model
ResNet50_model = ResNet50(weights='imagenet')

Pre-process the Data

When using TensorFlow as backend, Keras CNNs require a 4D array (which we'll also refer to as a 4D tensor) as input, with shape

$$ (\text{nb_samples}, \text{rows}, \text{columns}, \text{channels}), $$

where nb_samples corresponds to the total number of images (or samples), and rows, columns, and channels correspond to the number of rows, columns, and channels for each image, respectively.

The path_to_tensor function below takes a string-valued file path to a color image as input and returns a 4D tensor suitable for supplying to a Keras CNN. The function first loads the image and resizes it to a square image that is $224 \times 224$ pixels. Next, the image is converted to an array, which is then resized to a 4D tensor. In this case, since we are working with color images, each image has three channels. Likewise, since we are processing a single image (or sample), the returned tensor will always have shape

$$ (1, 224, 224, 3). $$

The paths_to_tensor function takes a numpy array of string-valued image paths as input and returns a 4D tensor with shape

$$ (\text{nb_samples}, 224, 224, 3). $$

Here, nb_samples is the number of samples, or number of images, in the supplied array of image paths. It is best to think of nb_samples as the number of 3D tensors (where each 3D tensor corresponds to a different image) in your dataset!

In [24]:
from keras.preprocessing import image                  
from tqdm import tqdm

def path_to_tensor(img_path):
    # loads RGB image as PIL.Image.Image type
    img = image.load_img(img_path, target_size=(224, 224))
    # convert PIL.Image.Image type to 3D tensor with shape (224, 224, 3)
    x = image.img_to_array(img)
    # convert 3D tensor to 4D tensor with shape (1, 224, 224, 3) and return 4D tensor
    return np.expand_dims(x, axis=0)

def paths_to_tensor(img_paths):
    list_of_tensors = [path_to_tensor(img_path) for img_path in tqdm(img_paths)]
    return np.vstack(list_of_tensors)

Making Predictions with ResNet-50

Getting the 4D tensor ready for ResNet-50, and for any other pre-trained model in Keras, requires some additional processing. First, the RGB image is converted to BGR by reordering the channels. All pre-trained models have the additional normalization step that the mean pixel (expressed in RGB as $[103.939, 116.779, 123.68]$ and calculated from all pixels in all images in ImageNet) must be subtracted from every pixel in each image. This is implemented in the imported function preprocess_input. If you're curious, you can check the code for preprocess_input here.

Now that we have a way to format our image for supplying to ResNet-50, we are now ready to use the model to extract the predictions. This is accomplished with the predict method, which returns an array whose $i$-th entry is the model's predicted probability that the image belongs to the $i$-th ImageNet category. This is implemented in the ResNet50_predict_labels function below.

By taking the argmax of the predicted probability vector, we obtain an integer corresponding to the model's predicted object class, which we can identify with an object category through the use of this dictionary.

In [21]:
from keras.applications.resnet50 import preprocess_input, decode_predictions

def ResNet50_predict_labels(img_path):
    # returns prediction vector for image located at img_path
    img = preprocess_input(path_to_tensor(img_path))
    return np.argmax(ResNet50_model.predict(img))

Write a Dog Detector

While looking at the dictionary, you will notice that the categories corresponding to dogs appear in an uninterrupted sequence and correspond to dictionary keys 151-268, inclusive, to include all categories from 'Chihuahua' to 'Mexican hairless'. Thus, in order to check to see if an image is predicted to contain a dog by the pre-trained ResNet-50 model, we need only check if the ResNet50_predict_labels function above returns a value between 151 and 268 (inclusive).

We use these ideas to complete the dog_detector function below, which returns True if a dog is detected in an image (and False if not).

In [22]:
### returns "True" if a dog is detected in the image stored at img_path
def dog_detector(img_path):
    prediction = ResNet50_predict_labels(img_path)
    return ((prediction <= 268) & (prediction >= 151)) 

(IMPLEMENTATION) Assess the Dog Detector

Question 3: Use the code cell below to test the performance of your dog_detector function.

  • What percentage of the images in human_files_short have a detected dog?
  • What percentage of the images in dog_files_short have a detected dog?

Answer:

In [20]:
### TODO: Test the performance of the dog_detector function
### on the images in human_files_short and dog_files_short.
def percent_dogs(img_file_names):
    return np.mean(list(map(dog_detector, img_file_names)))

humans_accuracy = percent_dogs(human_files_short)
dogs_accuracy = percent_dogs(dog_files_short)
print(f'Dogs found in humans {humans_accuracy:.1%}')
print(f'Dogs found in dogs {dogs_accuracy:.1%}')
Dogs found in humans 1.0%
Dogs found in dogs 100.0%

Step 3: Create a CNN to Classify Dog Breeds (from Scratch)

Now that we have functions for detecting humans and dogs in images, we need a way to predict breed from images. In this step, you will create a CNN that classifies dog breeds. You must create your CNN from scratch (so, you can't use transfer learning yet!), and you must attain a test accuracy of at least 1%. In Step 5 of this notebook, you will have the opportunity to use transfer learning to create a CNN that attains greatly improved accuracy.

Be careful with adding too many trainable layers! More parameters means longer training, which means you are more likely to need a GPU to accelerate the training process. Thankfully, Keras provides a handy estimate of the time that each epoch is likely to take; you can extrapolate this estimate to figure out how long it will take for your algorithm to train.

We mention that the task of assigning breed to dogs from images is considered exceptionally challenging. To see why, consider that even a human would have great difficulty in distinguishing between a Brittany and a Welsh Springer Spaniel.

Brittany Welsh Springer Spaniel

It is not difficult to find other dog breed pairs with minimal inter-class variation (for instance, Curly-Coated Retrievers and American Water Spaniels).

Curly-Coated Retriever American Water Spaniel

Likewise, recall that labradors come in yellow, chocolate, and black. Your vision-based algorithm will have to conquer this high intra-class variation to determine how to classify all of these different shades as the same breed.

Yellow Labrador Chocolate Labrador Black Labrador

We also mention that random chance presents an exceptionally low bar: setting aside the fact that the classes are slightly imabalanced, a random guess will provide a correct answer roughly 1 in 133 times, which corresponds to an accuracy of less than 1%.

Remember that the practice is far ahead of the theory in deep learning. Experiment with many different architectures, and trust your intuition. And, of course, have fun!

Pre-process the Data

We rescale the images by dividing every pixel in every image by 255.

In [21]:
from PIL import ImageFile                            
ImageFile.LOAD_TRUNCATED_IMAGES = True                 

# pre-process the data for Keras
train_tensors = paths_to_tensor(train_files).astype('float32')/255
valid_tensors = paths_to_tensor(valid_files).astype('float32')/255
test_tensors = paths_to_tensor(test_files).astype('float32')/255
100%|██████████| 6680/6680 [00:48<00:00, 137.31it/s]
100%|██████████| 835/835 [00:06<00:00, 120.91it/s]
100%|██████████| 836/836 [00:07<00:00, 118.40it/s]

(IMPLEMENTATION) Model Architecture

Create a CNN to classify dog breed. At the end of your code cell block, summarize the layers of your model by executing the line:

    model.summary()

We have imported some Python modules to get you started, but feel free to import as many modules as you need. If you end up getting stuck, here's a hint that specifies a model that trains relatively fast on CPU and attains >1% test accuracy in 5 epochs:

Sample CNN

Question 4: Outline the steps you took to get to your final CNN architecture and your reasoning at each step. If you chose to use the hinted architecture above, describe why you think that CNN architecture should work well for the image classification task.

Answer:

The model chosen below is based on the schema of ResNet model for Cifar-10.

The model contains 5 convolution-batch normalization-relu-max pooling-dropout segments. Each convolution layer is followed by batch normalization layer for improved learning. RELU activations are used to provide non-linearity. Dropout layers are used to reduce overfitting.

The convolution segments are followed by global average pooling layer that reduces the number of inputs to dense network consisting of one hidden layer and one output layer. The dense segment also uses batch normalization, RELU and dropout layers for reasons listed above.

The outout layer has softmax activation so that the network returns probabilities of dog belonging to all breeds.

In [43]:
from keras.layers import Conv2D, MaxPooling2D, GlobalAveragePooling2D
from keras.layers import Dropout, Flatten, Dense, BatchNormalization, Activation
from keras.models import Sequential


def conv2d(filters, **kwargs):
    return Conv2D(
        filters, kernel_size=(3, 3), strides=(1, 1),
        padding='same', use_bias=True,
        kernel_initializer='glorot_uniform', bias_initializer='zeros',
        **kwargs
    )

def relu():
    return Activation('relu')

def maxpool2d():
    return MaxPooling2D(pool_size=(2, 2), padding='same')

def dropout(rate=0.25):
    return Dropout(rate)

def batch_normalization():
    return BatchNormalization()
    
def add_conv_segment(model, filters, **kwargs):
    model.add(conv2d(filters, **kwargs))
    model.add(batch_normalization())
    model.add(relu())
    model.add(maxpool2d())
    model.add(dropout())


model = Sequential()
add_conv_segment(model, 16, input_shape=train_tensors.shape[1:])
add_conv_segment(model, 32)
add_conv_segment(model, 64)
add_conv_segment(model, 128)
add_conv_segment(model, 256)
model.add(GlobalAveragePooling2D())
model.add(Dense(256))
model.add(batch_normalization())
model.add(relu())
model.add(dropout())
model.add(Dense(len(dog_names), activation='softmax'))

model.summary()
_________________________________________________________________
Layer (type)                 Output Shape              Param #   
=================================================================
conv2d_38 (Conv2D)           (None, 224, 224, 16)      448       
_________________________________________________________________
batch_normalization_30 (Batc (None, 224, 224, 16)      64        
_________________________________________________________________
activation_59 (Activation)   (None, 224, 224, 16)      0         
_________________________________________________________________
max_pooling2d_24 (MaxPooling (None, 112, 112, 16)      0         
_________________________________________________________________
dropout_22 (Dropout)         (None, 112, 112, 16)      0         
_________________________________________________________________
conv2d_39 (Conv2D)           (None, 112, 112, 32)      4640      
_________________________________________________________________
batch_normalization_31 (Batc (None, 112, 112, 32)      128       
_________________________________________________________________
activation_60 (Activation)   (None, 112, 112, 32)      0         
_________________________________________________________________
max_pooling2d_25 (MaxPooling (None, 56, 56, 32)        0         
_________________________________________________________________
dropout_23 (Dropout)         (None, 56, 56, 32)        0         
_________________________________________________________________
conv2d_40 (Conv2D)           (None, 56, 56, 64)        18496     
_________________________________________________________________
batch_normalization_32 (Batc (None, 56, 56, 64)        256       
_________________________________________________________________
activation_61 (Activation)   (None, 56, 56, 64)        0         
_________________________________________________________________
max_pooling2d_26 (MaxPooling (None, 28, 28, 64)        0         
_________________________________________________________________
dropout_24 (Dropout)         (None, 28, 28, 64)        0         
_________________________________________________________________
conv2d_41 (Conv2D)           (None, 28, 28, 128)       73856     
_________________________________________________________________
batch_normalization_33 (Batc (None, 28, 28, 128)       512       
_________________________________________________________________
activation_62 (Activation)   (None, 28, 28, 128)       0         
_________________________________________________________________
max_pooling2d_27 (MaxPooling (None, 14, 14, 128)       0         
_________________________________________________________________
dropout_25 (Dropout)         (None, 14, 14, 128)       0         
_________________________________________________________________
conv2d_42 (Conv2D)           (None, 14, 14, 256)       295168    
_________________________________________________________________
batch_normalization_34 (Batc (None, 14, 14, 256)       1024      
_________________________________________________________________
activation_63 (Activation)   (None, 14, 14, 256)       0         
_________________________________________________________________
max_pooling2d_28 (MaxPooling (None, 7, 7, 256)         0         
_________________________________________________________________
dropout_26 (Dropout)         (None, 7, 7, 256)         0         
_________________________________________________________________
global_average_pooling2d_5 ( (None, 256)               0         
_________________________________________________________________
dense_15 (Dense)             (None, 256)               65792     
_________________________________________________________________
batch_normalization_35 (Batc (None, 256)               1024      
_________________________________________________________________
activation_64 (Activation)   (None, 256)               0         
_________________________________________________________________
dropout_27 (Dropout)         (None, 256)               0         
_________________________________________________________________
dense_16 (Dense)             (None, 133)               34181     
=================================================================
Total params: 495,589
Trainable params: 494,085
Non-trainable params: 1,504
_________________________________________________________________

Compile the Model

In [44]:
model.compile(optimizer='rmsprop', loss='categorical_crossentropy', metrics=['accuracy'])

(IMPLEMENTATION) Train the Model

Train your model in the code cell below. Use model checkpointing to save the model that attains the best validation loss.

You are welcome to augment the training data, but this is not a requirement.

In [45]:
from keras.callbacks import ModelCheckpoint, EarlyStopping

### TODO: specify the number of epochs that you would like to use to train the model.

epochs = 20

# Early stopping was added despite the instructions not to modify the code below.
# Training this network was computationaly heavy and time-consuming.
# I could not afford wasting CPU cycles on running too many epochs that wouldn't bring loss reduction.

### Do NOT modify the code below this line.

checkpointer = ModelCheckpoint(filepath='saved_models/weights.best.from_scratch.hdf5', 
                               verbose=1, save_best_only=True)

stopping = EarlyStopping(monitor='val_loss', min_delta=0, patience=3, verbose=1, mode='auto')

model.fit(train_tensors, train_targets, 
          validation_data=(valid_tensors, valid_targets),
          epochs=epochs, batch_size=20, callbacks=[checkpointer, stopping], verbose=1)
Train on 6680 samples, validate on 835 samples
Epoch 1/20
6680/6680 [==============================] - 1048s 157ms/step - loss: 5.0603 - acc: 0.0160 - val_loss: 5.1383 - val_acc: 0.0108

Epoch 00001: val_loss improved from inf to 5.13827, saving model to saved_models/weights.best.from_scratch.hdf5
Epoch 2/20
6680/6680 [==============================] - 1041s 156ms/step - loss: 4.7971 - acc: 0.0283 - val_loss: 5.0835 - val_acc: 0.0251

Epoch 00002: val_loss improved from 5.13827 to 5.08346, saving model to saved_models/weights.best.from_scratch.hdf5
Epoch 3/20
6680/6680 [==============================] - 1037s 155ms/step - loss: 4.6100 - acc: 0.0385 - val_loss: 4.5786 - val_acc: 0.0299

Epoch 00003: val_loss improved from 5.08346 to 4.57858, saving model to saved_models/weights.best.from_scratch.hdf5
Epoch 4/20
6680/6680 [==============================] - 1007s 151ms/step - loss: 4.4573 - acc: 0.0476 - val_loss: 4.3418 - val_acc: 0.0407

Epoch 00004: val_loss improved from 4.57858 to 4.34178, saving model to saved_models/weights.best.from_scratch.hdf5
Epoch 5/20
6680/6680 [==============================] - 1004s 150ms/step - loss: 4.3147 - acc: 0.0531 - val_loss: 4.6325 - val_acc: 0.0539

Epoch 00005: val_loss did not improve
Epoch 6/20
6680/6680 [==============================] - 880s 132ms/step - loss: 4.1760 - acc: 0.0666 - val_loss: 4.4920 - val_acc: 0.0503

Epoch 00006: val_loss did not improve
Epoch 7/20
6680/6680 [==============================] - 851s 127ms/step - loss: 4.0528 - acc: 0.0847 - val_loss: 4.3418 - val_acc: 0.0802

Epoch 00007: val_loss improved from 4.34178 to 4.34175, saving model to saved_models/weights.best.from_scratch.hdf5
Epoch 8/20
6680/6680 [==============================] - 795s 119ms/step - loss: 3.9244 - acc: 0.0994 - val_loss: 3.9873 - val_acc: 0.0874

Epoch 00008: val_loss improved from 4.34175 to 3.98731, saving model to saved_models/weights.best.from_scratch.hdf5
Epoch 9/20
6680/6680 [==============================] - 4541s 680ms/step - loss: 3.8192 - acc: 0.1063 - val_loss: 4.6509 - val_acc: 0.0719

Epoch 00009: val_loss did not improve
Epoch 10/20
6680/6680 [==============================] - 751s 112ms/step - loss: 3.6980 - acc: 0.1332 - val_loss: 4.6015 - val_acc: 0.0695

Epoch 00010: val_loss did not improve
Epoch 11/20
6680/6680 [==============================] - 761s 114ms/step - loss: 3.6220 - acc: 0.1425 - val_loss: 4.5926 - val_acc: 0.0707

Epoch 00011: val_loss did not improve
Epoch 00011: early stopping
Out[45]:
<keras.callbacks.History at 0x7f1374ef57b8>

Load the Model with the Best Validation Loss

In [46]:
model.load_weights('saved_models/weights.best.from_scratch.hdf5')

Test the Model

Try out your model on the test dataset of dog images. Ensure that your test accuracy is greater than 1%.

In [47]:
# get index of predicted dog breed for each image in test set
dog_breed_predictions = [np.argmax(model.predict(np.expand_dims(tensor, axis=0))) for tensor in test_tensors]

# report test accuracy
test_accuracy = 100*np.sum(np.array(dog_breed_predictions)==np.argmax(test_targets, axis=1))/len(dog_breed_predictions)
print('Test accuracy: %.4f%%' % test_accuracy)
Test accuracy: 9.3301%

Step 4: Use a CNN to Classify Dog Breeds

To reduce training time without sacrificing accuracy, we show you how to train a CNN using transfer learning. In the following step, you will get a chance to use transfer learning to train your own CNN.

Obtain Bottleneck Features

In [39]:
bottleneck_features = np.load('bottleneck_features/DogVGG16Data.npz')
train_VGG16 = bottleneck_features['train']
valid_VGG16 = bottleneck_features['valid']
test_VGG16 = bottleneck_features['test']

Model Architecture

The model uses the the pre-trained VGG-16 model as a fixed feature extractor, where the last convolutional output of VGG-16 is fed as input to our model. We only add a global average pooling layer and a fully connected layer, where the latter contains one node for each dog category and is equipped with a softmax.

In [40]:
VGG16_model = Sequential()
VGG16_model.add(GlobalAveragePooling2D(input_shape=train_VGG16.shape[1:]))
VGG16_model.add(Dense(133, activation='softmax'))

VGG16_model.summary()
_________________________________________________________________
Layer (type)                 Output Shape              Param #   
=================================================================
global_average_pooling2d_1 ( (None, 512)               0         
_________________________________________________________________
dense_8 (Dense)              (None, 133)               68229     
=================================================================
Total params: 68,229.0
Trainable params: 68,229.0
Non-trainable params: 0.0
_________________________________________________________________

Compile the Model

In [41]:
VGG16_model.compile(loss='categorical_crossentropy', optimizer='rmsprop', metrics=['accuracy'])

Train the Model

In [42]:
checkpointer = ModelCheckpoint(filepath='saved_models/weights.best.VGG16.hdf5', 
                               verbose=1, save_best_only=True)

VGG16_model.fit(train_VGG16, train_targets, 
          validation_data=(valid_VGG16, valid_targets),
          epochs=20, batch_size=20, callbacks=[checkpointer], verbose=1)
Train on 6680 samples, validate on 835 samples
Epoch 1/20
6440/6680 [===========================>..] - ETA: 0s - loss: 12.4629 - acc: 0.1152Epoch 00000: val_loss improved from inf to 10.96549, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 12.3872 - acc: 0.1198 - val_loss: 10.9655 - val_acc: 0.2096
Epoch 2/20
6600/6680 [============================>.] - ETA: 0s - loss: 10.3748 - acc: 0.2815Epoch 00001: val_loss improved from 10.96549 to 10.22969, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 10.3671 - acc: 0.2819 - val_loss: 10.2297 - val_acc: 0.2946
Epoch 3/20
6540/6680 [============================>.] - ETA: 0s - loss: 9.9793 - acc: 0.3309Epoch 00002: val_loss improved from 10.22969 to 10.17327, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 9.9560 - acc: 0.3325 - val_loss: 10.1733 - val_acc: 0.2934
Epoch 4/20
6580/6680 [============================>.] - ETA: 0s - loss: 9.7922 - acc: 0.3565Epoch 00003: val_loss improved from 10.17327 to 10.06220, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 9.7821 - acc: 0.3575 - val_loss: 10.0622 - val_acc: 0.3186
Epoch 5/20
6660/6680 [============================>.] - ETA: 0s - loss: 9.6577 - acc: 0.3713Epoch 00004: val_loss improved from 10.06220 to 9.90231, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 9.6561 - acc: 0.3711 - val_loss: 9.9023 - val_acc: 0.3102
Epoch 6/20
6480/6680 [============================>.] - ETA: 0s - loss: 9.4337 - acc: 0.3931Epoch 00005: val_loss improved from 9.90231 to 9.87181, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 9.4434 - acc: 0.3927 - val_loss: 9.8718 - val_acc: 0.3281
Epoch 7/20
6620/6680 [============================>.] - ETA: 0s - loss: 9.3256 - acc: 0.4023Epoch 00006: val_loss improved from 9.87181 to 9.51339, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 9.3230 - acc: 0.4021 - val_loss: 9.5134 - val_acc: 0.3365
Epoch 8/20
6600/6680 [============================>.] - ETA: 0s - loss: 9.0375 - acc: 0.4203Epoch 00007: val_loss improved from 9.51339 to 9.39657, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 9.0484 - acc: 0.4196 - val_loss: 9.3966 - val_acc: 0.3629
Epoch 9/20
6620/6680 [============================>.] - ETA: 0s - loss: 8.9525 - acc: 0.4301Epoch 00008: val_loss did not improve
6680/6680 [==============================] - 1s - loss: 8.9378 - acc: 0.4308 - val_loss: 9.4116 - val_acc: 0.3497
Epoch 10/20
6660/6680 [============================>.] - ETA: 0s - loss: 8.8314 - acc: 0.4353Epoch 00009: val_loss improved from 9.39657 to 9.22341, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 8.8291 - acc: 0.4355 - val_loss: 9.2234 - val_acc: 0.3713
Epoch 11/20
6580/6680 [============================>.] - ETA: 0s - loss: 8.6980 - acc: 0.4435Epoch 00010: val_loss improved from 9.22341 to 9.15638, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 8.7064 - acc: 0.4430 - val_loss: 9.1564 - val_acc: 0.3749
Epoch 12/20
6620/6680 [============================>.] - ETA: 0s - loss: 8.5701 - acc: 0.4508Epoch 00011: val_loss improved from 9.15638 to 9.10389, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 8.5773 - acc: 0.4503 - val_loss: 9.1039 - val_acc: 0.3832
Epoch 13/20
6560/6680 [============================>.] - ETA: 0s - loss: 8.5030 - acc: 0.4616Epoch 00012: val_loss improved from 9.10389 to 9.03197, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 8.5032 - acc: 0.4612 - val_loss: 9.0320 - val_acc: 0.3808
Epoch 14/20
6600/6680 [============================>.] - ETA: 0s - loss: 8.4801 - acc: 0.4655Epoch 00013: val_loss improved from 9.03197 to 8.99557, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 8.4731 - acc: 0.4657 - val_loss: 8.9956 - val_acc: 0.3868
Epoch 15/20
6440/6680 [===========================>..] - ETA: 0s - loss: 8.3778 - acc: 0.4696Epoch 00014: val_loss did not improve
6680/6680 [==============================] - 1s - loss: 8.3955 - acc: 0.4683 - val_loss: 9.0444 - val_acc: 0.3772
Epoch 16/20
6640/6680 [============================>.] - ETA: 0s - loss: 8.3351 - acc: 0.4708Epoch 00015: val_loss improved from 8.99557 to 8.97953, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 8.3247 - acc: 0.4713 - val_loss: 8.9795 - val_acc: 0.3832
Epoch 17/20
6560/6680 [============================>.] - ETA: 0s - loss: 8.1914 - acc: 0.4814Epoch 00016: val_loss improved from 8.97953 to 8.86307, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 8.2012 - acc: 0.4810 - val_loss: 8.8631 - val_acc: 0.3892
Epoch 18/20
6460/6680 [============================>.] - ETA: 0s - loss: 8.1488 - acc: 0.4876Epoch 00017: val_loss did not improve
6680/6680 [==============================] - 1s - loss: 8.1610 - acc: 0.4867 - val_loss: 8.8646 - val_acc: 0.3856
Epoch 19/20
6640/6680 [============================>.] - ETA: 0s - loss: 8.1590 - acc: 0.4892Epoch 00018: val_loss improved from 8.86307 to 8.84546, saving model to saved_models/weights.best.VGG16.hdf5
6680/6680 [==============================] - 1s - loss: 8.1471 - acc: 0.4898 - val_loss: 8.8455 - val_acc: 0.3952
Epoch 20/20
6580/6680 [============================>.] - ETA: 0s - loss: 8.1160 - acc: 0.4910Epoch 00019: val_loss did not improve
6680/6680 [==============================] - 1s - loss: 8.1240 - acc: 0.4903 - val_loss: 8.8814 - val_acc: 0.3976
Out[42]:
<keras.callbacks.History at 0x7f8620662ac8>

Load the Model with the Best Validation Loss

In [43]:
VGG16_model.load_weights('saved_models/weights.best.VGG16.hdf5')

Test the Model

Now, we can use the CNN to test how well it identifies breed within our test dataset of dog images. We print the test accuracy below.

In [44]:
# get index of predicted dog breed for each image in test set
VGG16_predictions = [np.argmax(VGG16_model.predict(np.expand_dims(feature, axis=0))) for feature in test_VGG16]

# report test accuracy
test_accuracy = 100*np.sum(np.array(VGG16_predictions)==np.argmax(test_targets, axis=1))/len(VGG16_predictions)
print('Test accuracy: %.4f%%' % test_accuracy)
Test accuracy: 41.7464%

Predict Dog Breed with the Model

In [45]:
from extract_bottleneck_features import *

def VGG16_predict_breed(img_path):
    # extract bottleneck features
    bottleneck_feature = extract_VGG16(path_to_tensor(img_path))
    # obtain predicted vector
    predicted_vector = VGG16_model.predict(bottleneck_feature)
    # return dog breed that is predicted by the model
    return dog_names[np.argmax(predicted_vector)]

Step 5: Create a CNN to Classify Dog Breeds (using Transfer Learning)

You will now use transfer learning to create a CNN that can identify dog breed from images. Your CNN must attain at least 60% accuracy on the test set.

In Step 4, we used transfer learning to create a CNN using VGG-16 bottleneck features. In this section, you must use the bottleneck features from a different pre-trained model. To make things easier for you, we have pre-computed the features for all of the networks that are currently available in Keras:

The files are encoded as such:

Dog{network}Data.npz

where {network}, in the above filename, can be one of VGG19, Resnet50, InceptionV3, or Xception. Pick one of the above architectures, download the corresponding bottleneck features, and store the downloaded file in the bottleneck_features/ folder in the repository.

(IMPLEMENTATION) Obtain Bottleneck Features

In the code block below, extract the bottleneck features corresponding to the train, test, and validation sets by running the following:

bottleneck_features = np.load('bottleneck_features/Dog{network}Data.npz')
train_{network} = bottleneck_features['train']
valid_{network} = bottleneck_features['valid']
test_{network} = bottleneck_features['test']
In [2]:
import numpy as np

bottleneck_features = np.load('bottleneck_features/DogResnet50Data.npz')
train_Resnet50 = bottleneck_features['train']
valid_Resnet50 = bottleneck_features['valid']
test_Resnet50 = bottleneck_features['test']
print('Training data shape', train_Resnet50.shape)
Training data shape (6680, 1, 1, 2048)

(IMPLEMENTATION) Model Architecture

Create a CNN to classify dog breed. At the end of your code cell block, summarize the layers of your model by executing the line:

    <your model's name>.summary()

Question 5: Outline the steps you took to get to your final CNN architecture and your reasoning at each step. Describe why you think the architecture is suitable for the current problem.

Answer:

The output of the ResNet50 is 2048 single pixel tensors. The first step is to flatten it using global average pooling layer.

Then a neural network of one hidden layer and one output layer is applied. Batch normalization layer is added to improve learning and dropout to reduce overfitting. RELU is used to provide non-linearity.

Since the classification is multi-class softmax is used on the output layer. The number of neurons in the hidden layer was optimized by hand by trying various values.

In [5]:
from keras.layers import GlobalAveragePooling2D
from keras.layers import Dropout, Dense, BatchNormalization, Activation
from keras.models import Sequential

Resnet50_model = Sequential()
Resnet50_model.add(GlobalAveragePooling2D(input_shape=train_Resnet50.shape[1:]))
Resnet50_model.add(Dense(512))
Resnet50_model.add(BatchNormalization())
Resnet50_model.add(Activation('relu'))
Resnet50_model.add(Dense(len(dog_names), activation='softmax'))

Resnet50_model.summary()
_________________________________________________________________
Layer (type)                 Output Shape              Param #   
=================================================================
global_average_pooling2d_2 ( (None, 2048)              0         
_________________________________________________________________
dense_2 (Dense)              (None, 512)               1049088   
_________________________________________________________________
batch_normalization_2 (Batch (None, 512)               2048      
_________________________________________________________________
activation_2 (Activation)    (None, 512)               0         
_________________________________________________________________
dense_3 (Dense)              (None, 133)               68229     
=================================================================
Total params: 1,119,365
Trainable params: 1,118,341
Non-trainable params: 1,024
_________________________________________________________________

(IMPLEMENTATION) Compile the Model

In [7]:
Resnet50_model.compile(loss='categorical_crossentropy', optimizer='adam', metrics=['accuracy'])

(IMPLEMENTATION) Train the Model

Train your model in the code cell below. Use model checkpointing to save the model that attains the best validation loss.

You are welcome to augment the training data, but this is not a requirement.

In [8]:
from keras.callbacks import ModelCheckpoint, EarlyStopping
from keras.preprocessing.image import ImageDataGenerator

epochs = 20
batch_size = 32

checkpointer = ModelCheckpoint(filepath='saved_models/weights.best.Resnet50.hdf5', 
                               verbose=1, save_best_only=True)

stopping = EarlyStopping(monitor='val_loss', min_delta=0, patience=3, verbose=1, mode='auto')

Resnet50_model.fit(train_Resnet50, train_targets, 
          validation_data=(valid_Resnet50, valid_targets),
          epochs=epochs, batch_size=batch_size, callbacks=[checkpointer, stopping], verbose=1)
Train on 6680 samples, validate on 835 samples
Epoch 1/20
6680/6680 [==============================] - 4s 568us/step - loss: 1.4263 - acc: 0.6582 - val_loss: 0.7182 - val_acc: 0.7844

Epoch 00001: val_loss improved from inf to 0.71816, saving model to saved_models/weights.best.Resnet50.hdf5
Epoch 2/20
6680/6680 [==============================] - 3s 500us/step - loss: 0.2980 - acc: 0.9274 - val_loss: 0.6152 - val_acc: 0.8216

Epoch 00002: val_loss improved from 0.71816 to 0.61515, saving model to saved_models/weights.best.Resnet50.hdf5
Epoch 3/20
6680/6680 [==============================] - 3s 508us/step - loss: 0.1223 - acc: 0.9790 - val_loss: 0.5792 - val_acc: 0.8132

Epoch 00003: val_loss improved from 0.61515 to 0.57921, saving model to saved_models/weights.best.Resnet50.hdf5
Epoch 4/20
6680/6680 [==============================] - 4s 526us/step - loss: 0.0574 - acc: 0.9915 - val_loss: 0.5341 - val_acc: 0.8251

Epoch 00004: val_loss improved from 0.57921 to 0.53406, saving model to saved_models/weights.best.Resnet50.hdf5
Epoch 5/20
6680/6680 [==============================] - 3s 517us/step - loss: 0.0315 - acc: 0.9978 - val_loss: 0.5241 - val_acc: 0.8491

Epoch 00005: val_loss improved from 0.53406 to 0.52410, saving model to saved_models/weights.best.Resnet50.hdf5
Epoch 6/20
6680/6680 [==============================] - 5s 724us/step - loss: 0.0261 - acc: 0.9969 - val_loss: 0.5553 - val_acc: 0.8455

Epoch 00006: val_loss did not improve
Epoch 7/20
6680/6680 [==============================] - 5s 796us/step - loss: 0.0296 - acc: 0.9952 - val_loss: 0.5377 - val_acc: 0.8359

Epoch 00007: val_loss did not improve
Epoch 8/20
6680/6680 [==============================] - 5s 713us/step - loss: 0.0234 - acc: 0.9964 - val_loss: 0.5383 - val_acc: 0.8467

Epoch 00008: val_loss did not improve
Epoch 00008: early stopping
Out[8]:
<keras.callbacks.History at 0x7fdc710cd198>

(IMPLEMENTATION) Load the Model with the Best Validation Loss

In [9]:
Resnet50_model.load_weights('saved_models/weights.best.Resnet50.hdf5')

(IMPLEMENTATION) Test the Model

Try out your model on the test dataset of dog images. Ensure that your test accuracy is greater than 60%.

In [10]:
Resnet50_predictions = [np.argmax(Resnet50_model.predict(np.expand_dims(feature, axis=0))) for feature in test_Resnet50]

test_accuracy = 100 * np.sum(np.array(Resnet50_predictions) == np.argmax(test_targets, axis=1)) / len(Resnet50_predictions)
print('Test accuracy: %.4f%%' % test_accuracy)
Test accuracy: 83.2536%

(IMPLEMENTATION) Predict Dog Breed with the Model

Write a function that takes an image path as input and returns the dog breed (Affenpinscher, Afghan_hound, etc) that is predicted by your model.

Similar to the analogous function in Step 5, your function should have three steps:

  1. Extract the bottleneck features corresponding to the chosen CNN model.
  2. Supply the bottleneck features as input to the model to return the predicted vector. Note that the argmax of this prediction vector gives the index of the predicted dog breed.
  3. Use the dog_names array defined in Step 0 of this notebook to return the corresponding breed.

The functions to extract the bottleneck features can be found in extract_bottleneck_features.py, and they have been imported in an earlier code cell. To obtain the bottleneck features corresponding to your chosen CNN architecture, you need to use the function

extract_{network}

where {network}, in the above filename, should be one of VGG19, Resnet50, InceptionV3, or Xception.

In [11]:
### TODO: Write a function that takes a path to an image as input
### and returns the dog breed that is predicted by the model.
from extract_bottleneck_features import extract_Resnet50
from operator import itemgetter

def Resnet50_predict_breed(img_path):
    # extract bottleneck features
    bottleneck_feature = extract_Resnet50(path_to_tensor(img_path))
    # obtain predicted vector
    probabilities, = Resnet50_model.predict(bottleneck_feature)
    # THe function does not return a single breed but all breeds sorted by descending probability.
    predictions_with_breeds = [(dog_names[idx], probability) for (idx, probability) in enumerate(probabilities)]
    predictions_with_breeds.sort(key=itemgetter(1), reverse=True)
    return predictions_with_breeds

Step 6: Write your Algorithm

Write an algorithm that accepts a file path to an image and first determines whether the image contains a human, dog, or neither. Then,

  • if a dog is detected in the image, return the predicted breed.
  • if a human is detected in the image, return the resembling dog breed.
  • if neither is detected in the image, provide output that indicates an error.

You are welcome to write your own functions for detecting humans and dogs in images, but feel free to use the face_detector and dog_detector functions developed above. You are required to use your CNN from Step 5 to predict dog breed.

Some sample output for our algorithm is provided below, but feel free to design your own user experience!

Sample Human Output

(IMPLEMENTATION) Write your Algorithm

In [12]:
### TODO: Write your algorithm.
### Feel free to use as many code cells as needed.
import os.path
import matplotlib.pyplot as plt
import matplotlib.image as mpimg
import random
from itertools import count

TOP_BREEDS = 3

def get_example(breed):
    # Get random image of a dog of given breed
    folder = os.path.join('dogImages', 'train', f'*{breed}')
    images = glob(os.path.join(folder, '*'))
    return random.choice(images)

def predict_and_show(filename):
    fig = plt.figure()
    fig.set_size_inches(15, 10)
    
    file_path = os.path.join('images', filename)
    
    is_dog = dog_detector(file_path)
    is_human = face_detector_4(file_path)
    
    if is_dog or is_human:
        breeds = Resnet50_predict_breed(file_path)
    else:
        breeds = []
        
    if is_dog:
        label = 'Dog'
    elif is_human:
        label = 'Human'
    else:
        label = 'Other'

    sub = plt.subplot(1, 1 + TOP_BREEDS, 1)
    sub.set_title(label)
    sub.imshow(mpimg.imread(file_path))
    column_counter = count(2)

    for breed, probability in breeds[:TOP_BREEDS]:
        sub = plt.subplot(1, 1 + TOP_BREEDS, next(column_counter))
        sub.set_title(f'{breed} ({probability:.2%})')
        example_image_path = get_example(breed)
        sub.imshow(mpimg.imread(example_image_path))

    plt.show()

Step 7: Test Your Algorithm

In this section, you will take your new algorithm for a spin! What kind of dog does the algorithm think that you look like? If you have a dog, does it predict your dog's breed accurately? If you have a cat, does it mistakenly think that your cat is a dog?

(IMPLEMENTATION) Test Your Algorithm on Sample Images!

Test your algorithm at least six images on your computer. Feel free to use any images you like. Use at least two human and two dog images.

Question 6: Is the output better than you expected :) ? Or worse :( ? Provide at least three possible points of improvement for your algorithm.

Answer:

The model seems to always favour some races (Engish springer spaniel) for all humans thus there is little variance in model's predictions and that is dissapointing. I guess dogs are really not that similar to humans. Finding similarities between dogs and humans is a task that I wouldn't be able to perform, so no wonder the algorithm is not doing the best job.

The output of the model is pretty good for dogs, although some fancy show dogs straight-from-the-barber seem to fool the classifier.

Possible improvements:

  • Don't show all 3 breeds always - show less if there is a dominating breed.
  • After each training session the algorithm predicts different breeds for humans - in each training it picks a favourite breed that it will assign to most humans; would be good to investigate this issue. My guess is that detecting dog breeds in humans the algorithm is just picking up noise in the neural network - the output presents the breed that got assigned the biggest weight and this breed changes depending on random initialization at the start of training.
  • The algorithm presents a random image from each breed; a nice-to-have feature would be to calculate similarities between the input photo and the pictures in the training set and try to display the most matching picture.
In [25]:
predict_and_show('asia.jpg')
predict_and_show('tomek.jpg')
In [28]:
predict_and_show('michal2.jpg')
In [32]:
predict_and_show('babcia.jpg')
predict_and_show('babcia2.jpg')
predict_and_show('babcia3.jpg')
In [27]:
predict_and_show('nelly_young.JPG')
predict_and_show('nelly_old.jpg')
In [29]:
predict_and_show('zuzia.jpg')
predict_and_show('zuzia2.jpg')
In [31]:
for idx in range(1, 20 + 1):
    predict_and_show(f'dog_show/{idx}.jpg')
In [30]:
predict_and_show('ball.jpg')
predict_and_show('plane.jpg')